Chemical products

Product for the maintenance of uncovered pool during the winter period, avoiding the growth of algae and bacteria which cause unclean water calcareous sediments.

DOSAGE AND INSTRUCTIONS FOR USE:

When the bathing period is over and maintenance has not yet been abandoned, superchlorinate with Dichloroisocyanuric Acid Granules (15 grs/m3).

Next day add 5 litres of winter treatment product for 100 m3 of water which should have a pH level between 7,2 and 7,6.

Pour the necessary dose of product directly into the pool. Switch on the filtration system until the chemical has been evenly distributed throughout the pool.

It is recommended that this process be repeated half way through the winter period.

Documentation

Download Technical Data Sheet

Download safety data sheet

Download general pool user's manual

Product for the maintenance of uncovered pool during the winter period, avoiding the growth of algae and bacteria which cause unclean water calcareous sediments.

CHARACTERISTICS:
- More effective against all kinds of algae whether of the green, black, or mustard variety at lower concentrations.

- Does not cause foaming.

- Compatible with most disinfection treatments.

- Without copper (it does not produce stains in swimming pools of liner, polyester or vinyl). 

- Totally soluble in water.

- Compatible with sand and diatomaceous earth filter.

DOSAGE AND INSTRUCTIONS FOR USE:
- When the bathing period is over and maintenance has not yet been abandoned, superchlorinate with Dichloroisocyanuric Acid Granules (15 grs/m3).

- Next day add 5 litres of winter treatment product per 60 m3 of water which should have a pH level between 7,2 and 7,4.

- Pour the necessary dose of product directly into the pool. Switch on the filtration system until the chemical has been evenly distributed throughout the pool.

- It is recommended that this process be repeated half way through the winter period.

A polymer flocculant with great coagulating and flocculating properties. Capable of removing particles in suspension found in pool water.

Features:

- High speed of coagulation.

- Good speed of decanting.

- Satisfactory behaviour at low temperatures.

- Can be used under a wide range of pH levels.

- Elimination of consumption in product for the adjustment of the pH.

- Lesser tendency for provoking phenomena of over dosage.

- Eliminates the metallic ions such as iron and manganese.

- Forms flocculi, which are easily filtered.

- Lower contents of aluminium soluble in treated water.

- Eliminates organic matter.

- Effectiveness in water with high turbidity.

Improves bacteriological quality of water and therefore reduces consumption of disinfecting chemicals.

Dosage and instructions for use:

- Recovery Treatment: Ensure the filtration equipment is switched off and the pool empty of bathers before adding 10 ml. for m3 of water.

5 litres bucket.

Documentation

Download Technical Data Sheet

Download Safety Data Sheet

Download general pool user's manual

Product in liquid form to adjust the pH of the water swimming pools when this is higher than 7.6. It is essential for optimum treatment of the water and to avoid the discomfort to the skin or eyes of bathers which an imbalance in the pH can cause.

Available in 10 litres and 25 litres buckets. 

Documentation

Ddownload Technical Data Sheet

Download safety data sheet

CTX-575 algae destroyer is a destructive product of all kinds of algae, even black.

Features:

- Green algae: This kind of algae trends to remain in suspension over the water, giving a green coloration. Also they used to adhering in the whole surface of the pool bottom.

Fast-acting compound with high bactericide, algaecide and fungicide, intended to prevent the formation and growth of algae in the pool water.

Prevention is the best solution.

Documentation

Download DataSheet CTX-500C

Download general pool maintenance guide

El Alguicida CTX-540 AlgaStop es un compuesto alguicida con propiedades no espumantes, especialmente formulado con la garantía CTX Professional para complementar el efecto desinfectante del Oxigeno Activado CTX-100. Previene el desarrollo de algas verdes, negras y amarillas o mostaza. Ayuda a que se asienten las algas muertas y otros sólidos en suspensión.

Características del CTX-540 AlgaStop

- Antialgas concentrado que no contribuye a la formación de espumas en el agua.

- Eficaz en cualquier tipo de filtro, tanto de arena como de diatomeas.

- Previene el desarrollo de algas verdes, negras y amarillas o mostaza.

- Ayuda a que se asienten las algas muertas y otros sólidos en suspensión.

- Microbicida concentrado.

- No contribuye a la formación de espumas en el agua.

- Totalmente soluble en agua.

Eficaz en cualquier tipo de filtro, tanto de arena como de diatomeas. Previene el desarrollo de algas de «agua verde», de algas negras en las paredes de la piscina y de algas llamadas amarillas o mostaza y ayuda a que se asienten las algas muertas y otros sólidos en suspensión.

Tratamiento Inicial

Adicionar 150 ml. de producto por cada 10 m3 de agua. La dosis inicial deberá repetirse siempre que se aprecie una falta de transparencia en el agua.

Tratamiento de Mantenimiento

Añadir 50 ml. de producto por cada 10 m3 de agua una vez por semana. Estas dosis son de carácter orientativo y pueden ser modificadas en función de las características propias de cada piscina, climatología, etc.

Verter la dosis necesaria de producto en un recipiente con agua y repartir dicha solución sobre la superficie del agua, preferentemente al atardecer y sin la presencia de bañistas en el agua.

Documentación:

Descargar Hoja Técnica de Producto

Descargar Ficha de Seguridad

What is ACO?

ACO® is an Active Catalytic Oxidiser that works by harnessing the natural energy of UV light from the sun to catalyse the formation of free radicals to increase the RedOx potential in the water. Free radicals are the active ingredients of ozone. They oxidise just like chlorine to remove pollutants but do not form noxious disinfection by-products. ACO® is not consumed in the process, it just makes what happens naturally much more efficient. In chlorinated systems ACO® also protects chlorine from photolysis by sunlight and makes it last three times longer in outdoor facilities. 

ACO® does the same as cyanuric acid, but instead of reducing oxidation capacity, ACO®increases the oxidation potential of the water.

Your advantages at a glance

• Fish-Friendly Water Treatment – with ACO® bio for all outdoor biological systems.
• Clearer water – Catalysis of natural UV oxidation of organics in the pool reduces the load on all other filtration equipment..
• Healthier water - In chlorinated systems oxidation by free radicals reduces production of toxic disinfection by-products such as trichloramine, chloroform and cyanogen chloride.
• High efficiency - ACO® extends the half-life of chlorine and peroxide by over 300 %, giving you substantial chemical savings
• no pinniped eye irritation → no cetacean pulmonary irritation → no walrus skin irritation.

How to use ACO®

In animal systems ACO® is best dosed continually using a peristaltic pump (Dryden Aqua flocculation pump) after the AFM® filter; the dosage rate, depending on load, is 0.5 - 1.0 ml per m3 of filtered turnover.

We recommend that dosage be doubled during the first month of treatment. Using this amount.

ACO® will take from six to eight weeks before the full effects are apparent.

ACO® can also be dosed manually direct into the bassin.

ACO is available in: 

- 5l drums.

- 20l drums.

Documentation:

Download ACO Brochure Aquariums

Video:

Analizador inteligente Blue Connect Plus Salt Astralpool 71663.

Documentation:

Download Blue Connect Plus Salt Manual

Video:

Comparative Chart Blue Connect Go vs Blue Connect Plus Salt

Documentation:

CTX-70 SurfoSAN® is a neutral liquid product with powerful sanitizing action and pleasant pine smell to sanitize damp and/or contaminated surfaces.

Extraordinary product to sanitize any surface and equipment. Without rinsing. Aldehyde free.

SurfoSAN® Characteristics 

CTX-70 SurfoSAN® sanitizes all types of non-hospital surfaces (swimming pools, saunas, solariums, changing rooms, showers, schools, ...):

- It does not contain bleach.

- It has an excellent sanitizing power

- Product with neutral pH, suitable for all types of surfaces. Non-corrosive (floors, walls, ceilings, and benches in showers, saunas, changing rooms, accesses to the swimming pool, etc. spraying)

- Product with neutral pH, suitable for all types of materials. Non-corrosive (plastic, metal, glass, ceramic, stone, porcelain, etc.)

- Aldehyde-free

- With deodorant action and pleasant pine smell.

- Non-ADR product (for transport of dangerous goods by road) in formats ≤ 5 l

Dosage and use instructions:

- Use undiluted.

- Apply CTX-70 SurfoSAN® daily spraying the product on the surfaces of the benches, walls and floors of showers, saunas, changing rooms, accesses to swimming pools, etc.
- Allow to dry without rinsing so that the sanitizing action of the product is long lasting.
- Recommended contact time: 15 min. (after this time, if you wish you can rinse the surface treated with water).
- Product performance (by spraying on the treatment surface): Consumption = 55 - 60 g/m2 approx.

Composition:

Contains: benzalkonium chloride and isopropyl alcohol 

Aldehyde free

Documentation:

Download Surfosan CTX-70 surface sanitizer data sheet