Air pump designed for spas, hot tubs and similar applications that produces bubbles by pumping medium and high volumes of air, continuously.
It is also used to remove the filter bed, for example in washing cycles, or where a low air flow is needed.
The pump casing and impeller are made of injected aluminum alloy while the motor shaft is made of stainless steel and has the impeller directly adapted to the shaft and dynamically balanced. The motors, 2-pole single-phase or three-phase for continuous use, are manufactured in accordance with CEI 2/3 1988 standards, and incorporate external IP54 protection and class F insulation.
Pumps can be mounted horizontally or vertically. Additionally, as there is no contact between the moving and static parts of the pump, no lubricant or maintenance is needed and there is no wear on parts.
The turbines can work at a maximum temperature of 40°C. Aggressive, flammable or explosive gases cannot be used.
Don't just trust our words.
Problems with transportation and after a WhatsApp and a call the next day we received our robot.
They called us to confirm that everything was ok, highly recommended.
Material received in 48 hours,
20 minutes on the phone for installation questions and THANK YOU THANK YOU THANK YOU.
5 Stars. There are 5 of us and we are very happy with the hot water. After searching for information for almost a month on low-consumption hot water systems, we decided on b. heat only hot water. Delivery in just 3 days from the web order.
Delivery was delayed a day due to the height of the package but then everything was perfect.
Thank you :)