pH Control

The NEXT control and dosing device has been specifically designed for the automatic control of pH and redox levels. It can be set to control whichever of these two functionalities is required. It is the most simple control and dosing device in the market. Small in size, it has all of the components required for immediate installation.

General technical features
• Automatic pH or redox control and dosing system.

• Measurement range of 0–14 (pH) and 0–100 mV (redox).

• It comes with a full installation kit, made up of a pH or redox electrode (depending on the model), a probe holder, standard solutions, suction and blow pipes, and suction and blow pipe fittings.

• ABS casing with IP65 protection rating.

• Digital display screen for both pH and redox readings.

• Remote on-off input (230 VAC) that keeps display lit up for calibration and programming.

Models:

 

- WARRANTY: 2 years.

Documentation

Download Installation manual

Do you need any spare part?

Click here 

El Control Basic controla automáticamente el pH de la piscina.

Recomendado para su instalación conjunta con los cloradores salinos AstralPool Sel Pure, Sel Clear, Smart y Smart +.

Kit de instalación incluido.

Se suministra sin electrodos (sensores) ni soluciones de calibración (ver complementos y accesorios).

¿Cómo funciona?

El Control Basic mide el valor del pH mediante una sonda de pH (no incluida) colocada en el sistema de filtración que analiza permanentemente el agua de la piscina. En función del valor medido, el Control Basic ajusta el pH de la piscina mediante su bomba dosificadora por adición de producto líquido corrector. El tiempo de dosificación se adapta en función de la desviación del pH de la piscina con el pH ideal.

Características:

- Incorpora una bomba peristáltica.

- 2 modelos:

- Carcasa plástica, protección IP55.

- Display a LCD retroiluminado.

- Protegido contra ajustes inadecuados.

- Auto calibración de los electrodos.

- Control de la calidad de los electrodos.

- Lectura del set point directa.

- Pausa de la dosificación por situación de alarma e indicación por LED intermitente.

- Dosificación proporcional.

- Programación simple y rápida del set-point.

- Alimentación: 230 Vca.

- Kit de instalación incluido.

- No se suministra con sensores ni soluciones de calibración. No se olvide seleccionarlo aquí.

- GARANTÍA: 2 años.

Documentación:

Descargar Manual de Usuario

¿Necesita algún repuesto?

Click aquí e indíquenos el número de repuesto que necesita.

 

In a swimming pool, the right balance lies mainly in the pH of its water. It is essential to have a correct and stable pH for the oxidant (particularly chlorine) used in the swimming pool to be effective. A well-adjusted pH provides oxidant savings and avoids many problems: irritation of the eyes, development of algae, corrosion of coatings, etc. pH Expert continually measures the pH of the water and, if necessary, makes fully automated adjustments in the pH corrector dosage, without any setting required.

For which pools?

• Maximum volume of treated water: 150 m³
• Dosage : Acid or basic

Features:

• User Interface: 1-line, backlit LCD screen
• Languages: 6 (FR-EN-ES-DE-IT-NL)
• Calibration: Semi-automatic, one-step (buffer solution included)
• Setpoints: Factory settings: pH = 7,4
• Safety: Configurable ‘OFA’ three-level over-dosage safety mechanism (settings from 0 to 6 hours, default 4 hours) Level sensor on correction product tank (on the fume-resistant intake tube)
• Sensor position: Vertical
• 2 years Warranty
• Accessories included in the pack:
  
  • pH Sensor
  • Buffer solution
  • Plumbing kit
  • Wall mounting kit
• Optional accessories:
  
  • POD Kit
  • DN63 mm Collar
  • Buffer solution
  • Anode earth kit

Documentation:

Download instructions for installation and use ph dosing system ph Expert

Do you need any spare?

Click here and let us know what you need. 

In a swimming pool, the right balance lies mainly in the pH of its water. It is essential to have a correct and stable pH for the oxidant (particularly chlorine) used in the swimming pool to be effective. A well-adjusted pH provides oxidant savings and avoids many problems: irritation of the eyes, development of algae, corrosion of coatings, etc. pH Expert continually measures the pH of the water and, if necessary, makes fully automated adjustments in the pH corrector dosage, without any setting required.

For which pools?

• Maximum volume of treated water: 150 m³
• Dosage : Acid or basic

Features:

• User Interface: 1-line, backlit LCD screen
• Languages: 6 (FR-EN-ES-DE-IT-NL)
• Calibration: Semi-automatic, one-step (buffer solution included)
• Setpoints: Factory settings: pH = 7,4
• Safety: Configurable ‘OFA’ three-level over-dosage safety mechanism (settings from 0 to 6 hours, default 4 hours) Level sensor on correction product tank (on the fume-resistant intake tube)
• Sensor position: Vertical
• 2 years Warranty
• Accessories included in the pack:
  
  • pH Sensor
  • Buffer solution
  • Plumbing kit
  • Wall mounting kit
• Optional accessories:
  
  • POD Kit
  • DN63 mm Collar
  • Buffer solution
  • Anode earth kit

Documentation:

Download instructions for installation and use ph dosing system ph Expert

Do you need any spare?

Click here and let us know what you need. 

Avady PRIM Rx Evolution Dosage Pump is a proportional regulation of chlorine dosage pump for pools up to 60m3.

- Supplied with a complete kit for quick and easy installation.

- Flowrate 1,5 litres/hour.

- Workpressure 1,5 bar.

- Safe: the pump stops dispensing if the redox value is too low or too high, and displays the status.

 Operation Video:

Documentation:

Download Prim RX Evolution Avady dosage pump technical sheet

Avady PRIM PH Evolution Dosage Pump is compatible with any domestic salt Chlorinator.

- Proportional pH- or pH+ regulation and dosage for pools up to  120m3.

- pH dosage from 5 to 9.

- Supplied with a complete kit for quick and easy installation.

- 100% compatible with sulphuric acid.

- For pH- or pH+.

- Flowrate 1,5 litres/hour.

- Maximum work pressure 1,5 bar.

 Videos:

How to replace peristaltic tube:

Documentation:

Download Technical Sheet

Universal timed metering pump for the injection of active oxygen, chlorine or flocculant. 

* No sensors.

* Flowrate 1.5 litres/hour.

* Max pressure 1,5 BAR.

* 6 automatic programmes.

PRACTICAL

UNIVERSAL

CAPACITY

For pools up to 150m³.

WARRANTY

▪ Device guaranteed for two years

 

Documentation:

Download technical sheet

ChloriProtect® makes it possible to measure the level of chlorine in the pool (Cl / mV). It controls the salt chlorinator for optimal dosage avoiding any risk of over-chlorination; preservation of equipment such as tarpaulins with bars, roller shutters or liner.

Features:

- Live display of the redox (chlorine) value in mV.
- Adjustable electrolytic salt cell cut-off limit
- Optimal dosage: Control of the electrolytic salt cell to prevent over-chlorination
- Protects equipment (e.g. bar-supported covers, blinds and liners.)
- SIMPLE. Optimum ease of use: one function per button
- SAFE. The control output is protected against overloads
by a 3,15A fuse (max. 700W). The difference in mV between the electrolytic cell start and stop is adjustable.
- WARRANTY. Device: two years
- Supplied with a complete kit for quick and easy installation.

Documentation:

Download technical sheet

Regule simultáneamente el pH y el cloro (mV).

Características:

▪ Visualización directa del valor del pH o de la concentración de cloro en mV.

▪ Dosificación del pH: el aparato activa la bomba integrada

▪ Dosificación del cloro: el aparato activa una bomba, un electrolizador conectado a la toma del cuadro o una electroválvula.

INNOVADOR

▪ El PROpilot pH® RX regula simultáneamente el pH y el cloro*.

▪ Indica simultáneamente el valor redox (concentración de cloro) y el valor del pH.

▪ Sondas protegidas contra las corrientes eléctricas inducidas en el agua.

SEGURO

▪ Alarma volumétrica que evita el vaciado del bidón del producto químico.

▪ Dosifica proporcionalmente a la demanda de pH y cloro.

POLIVALENTE

▪ Pensado para piscinas privadas o públicas.

▪ Bomba pH integrada**:

▪ Cloración: elija el medio de cloración adaptado (electrolizador, bomba dosificadora, electroválvula, etc.).

GARANTÍA

▪ Aparato: 2 años | Sondas: 1año.

* para que la medición redox funcione bien, procure que la piscina tenga un nivel de estabilizante que no supere las 15 ppm (15mg/l).

** incompatible con el ácido clorhídrico.

Documentación:

Descargar ficha técnica

Bomba peristáltica MyPool DOS 

- Bomba dosificadora peristáltica del pH o Redox con un caudal 1,6 l/h y una presión máxima de 1,5 bar.

- Modelos compatibles con Fluidra Conncect.

- Modo de dosificación proporcional para conseguir el valor de consigna.

- Se suministra con electrodo (pH o Redox), porta electrodos, dos collarines de Ø50 x ½", reducción roscada de ½" a ⅜", cable de conexión a bomba de filtración y soluciones tampón para la calibración del electrodo.

Características y beneficios

- Aplicación: inyección de productos químicos en la piscina para el tratamiento del agua.

- Simplicidad y avanzada tecnología con un bajo coste de adquisición y de mantenimiento.

- Display retroiluminado con 2 líneas y 16 caracteres multiidioma.

- Test de calidad de los electrodos.

- Puede utilizarse como pH o Redox solo cambiando la programación y empleando el electrodo adecuado.

- En el modo pH, permite modificar el corrector de pH de un minorador a un incrementador con solo modificar un jumper de la placa electrónica.

- Carcasa en polipropileno para una máxima resistencia a ambientes corrosivos.

- Protección IP65.

- Disponibles también en versiones compatibles con Fluidra Connect.

- Caudal (max): 1,6 l/h

- Presión (max): 1,5 bar

- Peso: 1,5 kg

- Potencia absorbida: 15W

- Velocidad de rotación: 30 RPM

Documentación:

Descargar manual de usuario

Recambios

Peristaltic pump with a flow adjustment setting from 0 to 100%.

Dimensions: 137 x 90 x 109 mm. 

The flow is controlled by adjusting the speed of the motor from a potentiometer on the front of the pump. It has an ON/OFF switch and a LED display that lights up green when the pump is working. The casing has a bearing so that the shaft is better supported.

Ideal for: Private pools.

Added value: Peristaltic pumps are ideal for pumping chemical products. Furthermore, MyPool pumps are both cheaper to manufacture and maintain than other pumps thanks to their simple design and advanced technology.

Recommended use: It is recommended that the Santoprene hose be changed annually so that it retains sufficient elasticity.

It is also recommended that the rotor and any other moving parts that are subject to wear and tear be oiled regularly.

Documentation:

Spare parts Breakdown 

Peristaltic pump with a flow adjustment setting from 0 to 100%.

Dimensions: 137 x 90 x 109 mm. 

The flow is controlled by adjusting the speed of the motor from a potentiometer on the front of the pump. It has an ON/OFF switch and a LED display that lights up green when the pump is working. The casing has a bearing so that the shaft is better supported.

Ideal for: Private pools.

Added value: Peristaltic pumps are ideal for pumping chemical products. Furthermore, MyPool pumps are both cheaper to manufacture and maintain than other pumps thanks to their simple design and advanced technology.

Recommended use: It is recommended that the Santoprene hose be changed annually so that it retains sufficient elasticity.

It is also recommended that the rotor and any other moving parts that are subject to wear and tear be oiled regularly.

Documentation:

Spare parts Breakdown 

Peristaltic pump with a flow adjustment setting from 0 to 100%.

Dimensions: 137 x 90 x 109 mm. 

The flow is controlled by adjusting the speed of the motor from a potentiometer on the front of the pump. It has an ON/OFF switch and a LED display that lights up green when the pump is working. The casing has a bearing so that the shaft is better supported.

Ideal for: Private pools.

Added value: Peristaltic pumps are ideal for pumping chemical products. Furthermore, MyPool pumps are both cheaper to manufacture and maintain than other pumps thanks to their simple design and advanced technology.

Recommended use: It is recommended that the Santoprene hose be changed annually so that it retains sufficient elasticity.

It is also recommended that the rotor and any other moving parts that are subject to wear and tear be oiled regularly.

Documentation:

Spare parts Breakdown 

Peristaltic pump with flow adjustment from 10% to 100%. The flow is controlled adjusting the motor speed by means of a potentiometer placed on the front panel.
Power connection of 90/260 V at 50/60 Hz.

Available models:

- Peristaltic pump 4 L/H 3 Bar

- Peristaltic pump 12 L/H 1 Bar

Documentation:

Dimensions

Installation Manual

Spare parts breakdown

- Bombas dosificadoras con control único.

- Alimentación_ 100-240V - 50/60 Hz - 30 W.

- Caudal: 5 l/h.

- Contrapresión máxima: 5 bar.

- Interruptor de apagado.

- Display 2 líneas, 16 caracteres multilenguaje.

- Conexiones hidráulicas de entrada y salida de 8/12 mm.

- Cadencia: 120 impulsos/minuto.

- Incluye electrodo de pH 1,5 metros.

- Incluye electrodo de RX (en panel pH/Rx) 1,5 metros.

- Incluye soluciones patrón de pH 4/7 y ORP 465mV.

- Rangos de medida pH/ppm:

- 0.00....5.00 ppm Cl2 (0.00...12.00 ppm Br).
- 0.00....14.00 pH, precisión +/-0,01 pH.
- -1500....+1500 mV, precisión +/-1 mV (sensor no incluido).
- 0...50ºC, precisión +/-0,1ºC (sensor no incluido).

- Rangos de medida pH/RX:

pH Control kit option with sensor for the measuring/control of pH + dosing pump for Sugar Valley equipments.

Including:

- 1 pH 1,5l/h dosing pump

- 1 pH sensor

- 1 sensor holder

- pH chip

- Pipes

- Buffer solutions (pH7, pH10, neutra)

* This product is exclusively for models from 2016 onwards. The image of the dosing pump is indicative, it may vary.

Redox Measurement and Control with Chip + redox meter + Swiss redox probe + 1 probe holder.

Measurement and control of redox as a control value for free chlorine. It controls the start and stop of the chlorinator.

It includes:

- 1 redox meter

- 1 Swiss redox probe

- 1 probe holder

* This product is exclusively intended for models from the year 2016.

PH electrode with calibration solutions for pH Control Basic Plus dosing pump and Óptima dosing pumps code 36004.

For proper operation of your pH dosing pump, it is recommended to calibrate the electrode before each season and every month during it.

Consult us to perform the calibration.

Redox sensor with Calibration Solutions reference 36005.

Redox sensor with Calibration Solutions for Control Basic, Redox Basic EV and Optima dosing pump.

Features and benefits

- AstralPool ORP Kit with 465mV standard solution.

- A correct calibration of the probe is important to guarantee a correct detection of the Redox levels.

- Compatible with the following AstralPool dosing and control equipment:

Control Basic
Control Basic Plus
Control Basic Double pH-EV
Redox Basic EV Plus
Optima
Optima Next

The steps to follow for the calibration of the Redox electrode are indicated in the instructions of each dosing or control equipment.

For a correct operation of your dosing pump, it is recommended to calibrate the electrode before each season and every month during it.

Consult us to perform the calibration.

Electrode Carrier PE 12M/M -1/2" ref. 4408040604 for these AstralPool Salt Chlorinators:

 

This electrode carrier is compatible with the following salt Chlorinators:

72670 - Easy Salt Next 190 + REG 1 (pH/ORP)	35258 - Pro-Chlore Salt Plus A-50+: 50g/h (pH/ORP) Ver ficha 35259 - Pro-Chlore Salt Plus A-80+: 80g/h (pH/ORP)
35260 - Pro-Chlore Salt Plus A-120+: 120g/h (pH/ORP)	35261 - Pro-Chlore Salt Plus A-180+: 180g/h (pH/ORP)
35262 - Pro-Chlore Salt Plus A-300+: 300g/h (pH/ORP)	35263 - Pro-Chlore Salt Plus A-600+: 600g/h (pH/ORP)
45836 - Pro-Chlore Salt PPM Plus A-50+: 50g/h (pH - ppm Cl)	45836 - Pro-Chlore Salt PPM Plus A-50+: 50g/h (pH - ppm Cl)
45837 - Pro-Chlore Salt PPM Plus A-80+: 80g/h (pH - ppm Cl)	45838 - Pro-Chlore Salt PPM Plus A-120+: 120g/h (pH - ppm Cl)
45839 - Pro-Chlore Salt PPM Plus A-180+: 180g/h (pH - ppm Cl)	45840 - Pro-Chlore Salt PPM Plus A-300+: 300g/h (pH - ppm Cl)
45841 - Pro-Chlore Salt PPM Plus A-600+: 600g/h (pH - ppm Cl)	52210 - Heliox UV LP+ AISI 316 L - 10 m3/h
52211 - Heliox UV LP+ AISI 316 L - 14 m3/h	52212 - Heliox UV LP+ AISI 316 L - 25 m3/h
52213 - Heliox UV LP+ AISI 316 L - 30 m3/h	52218 - Heliox UV LP+ PE - 10 m3/h
52219 - Heliox UV LP+ PE - 14 m3/h	52220 - Heliox UV LP+ PE - 20 m3/h
52221 - Heliox UV LP+ PE - 25 m3/h	54524 - Smart Control pH/Cl
54525 - Smart Control pH/ORP/Cl	57747 - AP Chlore 12Gr/h +UV 48 W + PH
57748 - AP Chlore 24Gr/h +UV 56 W + PH	57749 - AP Chlore 32Gr/h +UV 56 W + PH
57750 - AP Chlore 12Gr/h +UV 48 W + PH/ORP	57751 - AP Chlore 24Gr/h +UV 56 W + PH/ORP
57752 - AP Chlore 32Gr/h +UV 56 W + PH/ORP	57763 - AP 50Gr/h + UV 75W + control int. PH/ORP
57764 - AP 80Gr/h +UV 90 W + control int. PH/ORP	57765 - AP 120Gr/h +UV 90 Wx2 + control int. PH/ORP
57766 - AP 50Gr/h + UV 75W + control int. PH/CL	57767 - AP 80Gr/h +UV 90 W + control int. PH/CL
57768 - AP 120Gr/h +UV 90 Wx2 + control int. PH/CL	57769 - Panel soporte con portasondas PH/ORP para Piscina Comercial (Pro-Chlore, Easy Salt, Nature Salt, AP Neolysis)
60359 - AP PR-206 pH/ORP Ver ficha 60361 - AP PR-207 pH/Cl2 PPM	66129 - AP NEO/S (6 Gr/l) 12 Gr/h + UV 48 W + pH
66130 - AP NEO/S (6 Gr/l) 24 Gr/h + UV 56 W + pH	66138 - AP NEO/S (6 Gr/l) 32 Gr/h + UV 56 W + pH
66139 - AP NEO/S (6 Gr/l) 12 Gr/h + UV 48 W + pH/ORP	66140 - AP NEO/S (6 Gr/l) 24 Gr/h + UV 56 W + pH/ORP
66141 - AP NEO/S (6 Gr/l) 32 Gr/h + UV 56 W + pH/ORP	66448 - Portasondas opcional para EXT-1
70019 - ELITE CONNECT pH 12gCl2/h	70021 - ELITE CONNECT pH 24gCl2/h
70023 - ELITE CONNECT pH 32gCl2/h	70025 - ELITE CONNECT pH 42gCl2/h
70083 - Smart Next pH 7 g Cl2/h	70084 - Smart Next pH 12 g Cl2/h
70085 - Smart Next pH 21 g Cl2/h	70086 - Smart Next pH 30 g Cl2/h
70093 - Smart Next pH 40 g Cl2/h	70361 - ELITE CONNECT pH/ppm 12gCl2/h
70363 - ELITE CONNECT pH/ppm 24gCl2/h	70365 - ELITE CONNECT pH/ppm 32gCl2/h
70369 - ELITE CONNECT pH/ppm 42gCl2/h	70371 - ELITE CONNECT pH/ppm LS 12gCl2/h
70372 - ELITE CONNECT pH/ppm LS 24gCl2/h	71537 - pH / ORP / Temp. con portasondas de tuber
71538 - pH / ORP / Temp. con portasondas en panel	71539 - pH / Cl (ppm) / Temp. con portasondas en panel
71692 - ELECTROLISIS SMART NEXT 7 PH / RX	71693 - ELECTROLISIS SMART NEXT 12 PH / RX
71694 - ELECTROLISIS SMART NEXT 21 PH / RX	71695 - ELECTROLISIS SMART NEXT 30 PH / RX
71696 - ELECTROLISIS SMART NEXT 40 PH / RX	72663 - Easy Salt Next 75 Ver ficha 72664 - Easy Salt Next 75 + REG 1 (pH/ORP)
72665 - Easy Salt Next 100	72666 - Easy Salt Next 100 + REG 1 (pH/ORP)
72667 - Easy Salt Next 150	72668 - Easy Salt Next 150 + REG 1 (pH/ORP)
72669 - Easy Salt Next 190

In a swimming pool, the right balance lies mainly in the pH of its water. It is essential to have a correct and stable pH for the oxidant (particularly chlorine) used in the swimming pool to be effective. A well-adjusted pH provides oxidant savings and avoids many problems: irritation of the eyes, development of algae, corrosion of coatings, etc. pH Expert continually measures the pH of the water and, if necessary, makes fully automated adjustments in the pH corrector dosage, without any setting required.

For which pools?

• Maximum volume of treated water: 150 m³
• Dosage : Acid or basic

Features:

• User Interface: 1-line, backlit LCD screen
• Languages: 6 (FR-EN-ES-DE-IT-NL)
• Calibration: Semi-automatic, one-step (buffer solution included)
• Setpoints: Factory settings: pH = 7,4
• Safety: Configurable ‘OFA’ three-level over-dosage safety mechanism (settings from 0 to 6 hours, default 4 hours) Level sensor on correction product tank (on the fume-resistant intake tube)
• Sensor position: Vertical
• 2 years Warranty
• Accessories included in the pack:
  
  • pH Sensor
  • Buffer solution
  • Plumbing kit
  • Wall mounting kit
• Optional accessories:
  
  • POD Kit
  • DN63 mm Collar
  • Buffer solution
  • Anode earth kit

Documentation:

Download instructions for installation and use ph dosing system ph Expert

Do you need any spare?

Click here and let us know what you need.